C4 CAMOSKIN MED 7mm Pants

C4 CAMOSKIN MED 7mm Pants

The Camo Skin wetsuit is the 2025 addition to C4 Carbon popular wetsuits line. The Camo Skin is a two-piece spearfishing open cell wetsuit with external camouflage elastic lining.

The 100% CR Neoprene Rubber (Chloroprene) with which the Camo Skins are made is limestone based, like all the best Japanese neoprene foams. Thanks to a content of 99% calcium carbonate, this neoprene is among the most environment friendly. Neoprene is also certified by the TÜV for the absence of substances considered harmful such as Phthalates and Latex.

With a hardness range (Type C) between 0-2 and an elongation at break of 600%, the neoprene rubber with which the Camo Skins are made is among the softest and with the best elastic returns in the world. Melco Tape has been heat-glued to the base of the jacket’s buckles to prevent them from causing tears in the jacket when it is worn and buttoned.

Cut
The cut of the pants and jacket is anatomically pre-shaped, thus improving the fit and the movement in the water. The low number of panels used to assemble the suit has allowed fewer seams. This increased the fit comfort and elasticity of the suit, especially in the joints area.

The seams on the shoulder, knee and elbow areas have been eliminated to avoid unnecessary resistance and reduce the friction to a minimum. The cut in the lumbar and groin area is pre-shaped to increase the fit of the suit. The crotch area is also pre-shaped to avoid annoying chafing.

Lining
The lining fabric is made of 95% Polyester and 5% Spandex. This allows the fabric to have a perfect combination of four-way elasticity and maximum resistance to abrasions and cuts.

The two available camouflage patterns are not repetitive or a photographic reproduction, but have been created and hand painted digitally. This makes the two colour combinations not only unique and non replicable but extremely effective in camouflaging the spear fisherman.

Finishing
All the panels of the wetsuit are glued individually by hand and sewn with a non-passing seam on the outside, ensuring the least possible inflow of water. All edges of the suit are finished with the same type of stitching. The jacket also features Lycra binding to prevent damage when wearing the suit.

The padded chest reinforcement is integrated into the jacket to offer greater stability and comfort when loading the spearguns, and is finished with a polyurethane coating that visually identifies it on the jacket. The same protection is featured on the elbows and knees.